Product Description
This is a new non-leaking, pollution free sampler which is used for sampling for all kinds of toxic, corrosive, explosive and flammable samples under low pressure, high pressure or medium pressure from petrochemical process pipe.
We can also design and manufacture sealed sampling device to meet special technical and safety requirements.
Features
Sampling from devices or process lines
System purge
Easy operation with single handle
Product Detail
| Materials | 304, 304SS, 316SS |
| Cylinder Assembly | 500 ml cylinder |
| Needle Valves | |
| NPT Quick-connects | |
| Sampling Valve | Ball Valves: Seat and O-ring Max. Working Pressure: 103 bar @ 20 centidegrees Temperature Range: -18℃ to 232 centidegrees |
| Other Accessories | Metal Hoses |
| Pressure Gauge | |
| Connections | NPS 1/2 flange |
Note: Products of other specifications are available upon request.
Operation
1- Preparation
Install the sample cylinder and connect the hose to bottom side of the cylinder. Open the needle valves at both ends of the cylinder.
2- Sampling
Turn the handle to the “PROCESS” position, allowing the sample to flow continuously into and fill the cylinder. Hold for a period of time to ensure representative sampling.
3- Off
Turn the handle to the “OFF” position. Close the needle valves at both ends of the cylinder.
4- Depressurization/vent
Turn the handle to the “VENT” position, connecting the sampling line with the vent line to depressurize and discharge the residual sample.
5- OFF
Turn the handle to the “OFF” position and disconnect the hose. Remove the cylinder and connect the hose to the top quick connect to complete the sampling process.
